ASVAB Electronics Information Practice Test 299519 Results

Your Results Global Average
Questions 5 5
Correct 0 3.43
Score 0% 69%

Review

1

Which of the following statements about electrical resistance is true?

74% Answer Correctly

the less resistive the conductor is the slower electron flow will be

the more resistive the conductor is the faster electron flow will be

electrically conductive materials have no resistive properties

the more resistive the conductor is the slower electron flow will be


Solution

Resistance is opposition to the flow of current. As resistance increases, current decreases as resistance and current are inversely proportional.


2

What is the voltage of most household electrical systems in the United States?

59% Answer Correctly

110V

60V

60Hz

220V


Solution

Most households use electricity with a voltage of 110V.


3

The conversion of alternating current (AC) into direct current (DC) is called:

69% Answer Correctly

rectification

inductance

reactance

capacitance


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.


4

Resistance is measured in:

86% Answer Correctly

coulombs

amperes

ohms

volts


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


5

A solid state device has which of the following characteristics?

53% Answer Correctly

made entirely from conductive material

made entirely from semiconductor material

made entirely from insulative material

made from a mix of conductive and insulative material


Solution

The transistor is the foundation of modern electronic devices. It is made entirely from semiconductor material (making it a solid state device) and can serve many different functions in a circuit including acting as a switch, amplifier, or current regulator. A transistor works by allowing a small amount of current applied at the base to control general current flow from collector to emitter through the transistor.