ASVAB Electronics Information Practice Test 316067 Results

Your Results Global Average
Questions 5 5
Correct 0 2.95
Score 0% 59%

Review

1

The most common circuit configuration is:

58% Answer Correctly

household

series-parallel

parallel

series


Solution

Circuits are not limited to only series or only parallel configurations. Most circuits contain a mix of series and parallel segments. A good example is a household circuit breaker. Electrical outlets in each section of the house are wired in parallel with the circuit breaker for that section wired in series making it easy to cut off electricity to the parallel parts of the circuit when needed.


2

Which of the following is a characteristic of batteries connected in series?

61% Answer Correctly

two connections are made between each adjacent battery

total voltage equals the average of the individual battery voltages

total voltage equals the sum of the individual battery voltages

the positive terminal of one battery is connected to the positive terminal of the next


Solution

You can multiply the voltage or the current supplied by individual batteries by connecting them together either in series or in parallel. The characteristics of batteries connected in series are that total voltage equals the sum of the individual battery voltages, total current equals the average of the individual battery currents, the positive terminal of one battery is connected to the negative terminal of the next, and one connection is made between each adjacent battery.


3

Inductance is a factor in which of the following?

44% Answer Correctly

a DC circuit

batteries connected in serial

determining energy stored by a capacitor

an AC circuit


Solution

Inductance is a property of an AC circuit (or a component in an AC circuit) that quantifies resistance to changes in current. The current in an AC circuit is continuously changing and inductive reactance (the opposition to change) depends both on the inductance of the circuit or component and the rate at which the current is changing.


4 How would you connect 6 [9V 20A] batteries to achieve a combined power output of 54V 20A?
53% Answer Correctly
series-parallel
parallel
series
perpendicular

Solution

Connecting the 6 batteries in series multiplies their voltage while keeping their current the same yielding a 54V 20A configuration. Connecting the 6 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 120A configuration. Using a series-parallel connection, 3 batteries can be connected in series and 3 can be connected in parallel resulting in a 27V 60A configuration.


5 Use Ohm's Law to calculate the value of resistance in this circuit if voltage is 400 volts and current is 4 amps.
80% Answer Correctly
100 Ω
102 Ω
103 Ω
90 Ω

Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.

Solved for resistance, R = \( \frac{V}{I} \) = \( \frac{400}{4} \) = 100 Ω