ASVAB Electronics Information Practice Test 322739 Results

Your Results Global Average
Questions 5 5
Correct 0 3.71
Score 0% 74%

Review

1

The hertz is a unit of measurement for:

81% Answer Correctly

power

inductance

energy

frequency


Solution

The hertz is a unit of measurement for frequency.


2

Which of the following allows encapsulating complex circuit designs for easier integration into electronic devices and machines?

67% Answer Correctly

parallel circuits

series circuits

series-parallel circuits

integrated circuits


Solution

Circuits containing transistors are packaged into integrated circuit chips that allow encapsulating complex circuit designs (CPU, memory, I/O) for easier integration into electronic devices and machines.


3

A capacitor is often used for which of the following purposes?

68% Answer Correctly

to maintain power in a circuit when the primary power source is disconnected

as a primary power source

to allow a small amount of current to control a large amount of current

to convert alternating current into direct current


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.


4

What type of current flows in only one direction in a circuit?

82% Answer Correctly

series

direct

alternating

parallel


Solution

Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery.


5

This circuit component symbol represents a(n):

72% Answer Correctly

capacitor

inductor

transistor

diode


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.