| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.76 |
| Score | 0% | 55% |
Which of the following is not a common type of battery?
power-cycle |
|
wet cell |
|
dry cell |
|
deep-cycle |
Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery. The three most common types of batteries are dry cell (used in small devices like TV remotes), wet cell (used for cars), and deep-cycle (storage batteries used primarily for backup and emergency power).
Current is the rate of flow of electrons per unit time and is measured in:
volts |
|
coulombs |
|
amperes |
|
ohms |
Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.
In an electronic circuit, a thermocouple can be used to:
keep the circuit at a designated safe temperature |
|
link the temperature of one component in the circuit to that of another component in the circuit |
|
open or close a circuit at a designated temperature |
|
increase or decrease the temperature of a component in the circuit |
A thermocouple is a temperature sensor that consists of two wires made from different conductors. The junction of these two wires produces a voltage based on the temperature difference between them and can be used like a switch to open or close the circuit at a designated temperature.
Inductance is a factor in which of the following?
an AC circuit |
|
batteries connected in serial |
|
determining energy stored by a capacitor |
|
a DC circuit |
Inductance is a property of an AC circuit (or a component in an AC circuit) that quantifies resistance to changes in current. The current in an AC circuit is continuously changing and inductive reactance (the opposition to change) depends both on the inductance of the circuit or component and the rate at which the current is changing.
The conductivity of an element depends on how many electrons occupy which electron shell?
inner |
|
first |
|
middle |
|
outer |
All electricity is the movement of electrons which are subatomic particles that orbit the nucleus of an atom. Electrons occupy various energy levels called shells and how well an element enables the flow of electrons depends on how many electrons occupy its outer (valence) electron shell.