| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.03 |
| Score | 0% | 61% |
This circuit diagram represents a(n):
parallel circuit |
|
series circuit |
|
series-parallel circuit |
|
open circuit |
A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.
Which of the following is a characteristic of batteries connected in parallel?
the positive terminal of one battery is connected to the negative terminal of the next |
|
one connection is made between each adjacent battery |
|
total current equals the average of the individual battery currents |
|
total current equals the sum of the individual battery currents |
You can multiply the voltage or the current supplied by individual batteries by connecting them together either in series or in parallel. The characteristics of batteries connected in parallel are that total voltage equals the average of the individual battery voltages, total current equals the sum of the individual battery currents, the positive terminal of one battery is connected to the positive terminal of the next, the negative terminal of one battery is connected to the negative terminal of the next, and two connections are made between each adjacent battery.
Which of the following is the preferred method for splicing wires?
soldering |
|
screw-on connectors |
|
wrap in small gauge wire |
|
wire crimps |
Splicing is permanently joining two wires together. Splicing can be done with screw-on connectors or wire crimps but the preferred method for splicing is soldering. Soldering takes the most effort but results in a connection that is electrically and mechanically identical to the original wire.
This circuit component symbol represents a(n):
resistor |
|
inductor |
|
transformer |
|
capacitor |
An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.
A capacitor to an electronic circuit is like a _______________ to a house?
driveway |
|
gate |
|
storage shed |
|
safe |
Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.