ASVAB Electronics Information Practice Test 387473 Results

Your Results Global Average
Questions 5 5
Correct 0 3.62
Score 0% 72%

Review

1

Which of the following is a difference between a circuit breaker and a fuse?

80% Answer Correctly

all of these

a fuse responds more quickly than a circuit breaker

a fuse is cheaper than a circuit breaker

a circuit breaker can be reused


Solution

Like fuses, circuit breakers stop current flow once it reaches a certain amount. They have the advantage of being reusable (fuses must be replaced when "blown") but respond more slowly to current surges and are more expensive than fuses.


2 How would you connect 10 [12V 10A] batteries to achieve a combined power output of 60V 50A?
67% Answer Correctly
series-parallel
series
parallel
orthogonal

Solution

Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 120V 10A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 12V 100A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 60V 50A configuration.


3

The joule is a unit of measurement for:

67% Answer Correctly

capacitance

resistance

energy

power


Solution

The joule is a unit of measurement for energy.


4

Resistance and current are __________ proportional.

68% Answer Correctly

not

exponentially

directly

inversely


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


5

The ohm is a unit of measurement for:

81% Answer Correctly

resistance

power

energy

capacitance


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.