ASVAB Electronics Information Practice Test 399981 Results

Your Results Global Average
Questions 5 5
Correct 0 2.87
Score 0% 57%

Review

1

Inductance is a factor in which of the following?

44% Answer Correctly

determining energy stored by a capacitor

batteries connected in serial

a DC circuit

an AC circuit


Solution

Inductance is a property of an AC circuit (or a component in an AC circuit) that quantifies resistance to changes in current. The current in an AC circuit is continuously changing and inductive reactance (the opposition to change) depends both on the inductance of the circuit or component and the rate at which the current is changing.


2

One of the lights on your Christmas tree burns out and this causes the rest of the lights connected to that strand to go dark. How are the lights in that strand connected?

73% Answer Correctly

series-parallel

perpendicular

parallel

series


Solution

Lights connected in series form a chain with each light connecting to adjacent lights via one wire. Therefore, if one of the lights burns out and breaks the series, none of the other lights will receive power and they'll go dark. Lights connected in parallel each connect to the positive and negative nodes of the power source and would not go dark if one of their neighbors burnt out.


3

What is the frequency of most household electrical systems?

59% Answer Correctly

60MHz

110V

110Hz

60Hz


Solution

Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances. Most households use electricity with a frequency of 60Hz.


4

In an electronic circuit, a thermocouple can be used to:

42% Answer Correctly

open or close a circuit at a designated temperature

increase or decrease the temperature of a component in the circuit

link the temperature of one component in the circuit to that of another component in the circuit

keep the circuit at a designated safe temperature


Solution

A thermocouple is a temperature sensor that consists of two wires made from different conductors. The junction of these two wires produces a voltage based on the temperature difference between them and can be used like a switch to open or close the circuit at a designated temperature.


5

The valence shell of a semiconductor is how full of electrons?

67% Answer Correctly

less than half full

half full

more than half full

empty


Solution

Semiconductors have valence shells that are exacly half full and can conduct electricity under some conditions but not others. This property makes them useful for the control of electrical current.