ASVAB Electronics Information Practice Test 406009 Results

Your Results Global Average
Questions 5 5
Correct 0 3.20
Score 0% 64%

Review

1

Longer the electrical wires mean _______________ voltage drop.

73% Answer Correctly

lesser

complete

diminishing

greater


Solution

Electrical wires have a certain amount of resistance per foot. A longer wire means more resistance and a greater voltage drop.


2

An engineer who wants to document an electric circuit would create which of the following?

66% Answer Correctly

a matrix

a blueprint

a schematic

a layout


Solution

A schematic is the proper name for a drawing of an electric or electronic circuit.


3

Which of the following is the preferred method for splicing wires?

56% Answer Correctly

screw-on connectors

soldering

wire crimps

wrap in small gauge wire


Solution

Splicing is permanently joining two wires together. Splicing can be done with screw-on connectors or wire crimps but the preferred method for splicing is soldering. Soldering takes the most effort but results in a connection that is electrically and mechanically identical to the original wire.


4

Silver and gold are among the most highly conductive elements. Why is copper used much more often as a conductor in electrical circuits?

80% Answer Correctly

copper is durable and relatively cheap

silver and gold are brittle

all of these

silver and gold are costly


Solution

All conductors have resistance and the amount of resistance varies with the element.  But, resistance isn't the only consideration when choosing a conductor as the most highly conductive elements like silver and gold are also more expensive and more brittle than slightly less conductive elements like copper. A balance needs to be struck between the electrical qualities of a material and its cost and durability.


5

Which of the following is not true about a line drop?

43% Answer Correctly

it is a decrease in voltage between two points on a line

it is addressed by raising voltage and lowering current across the transmission line

it is caused by resistance

it is addressed by raising current and lowering voltage across the ransmission line


Solution

Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances. A line drop is a decrease in voltage between two points on an electrical transmission line due to resistance in the line. A lower current and higher voltage across the line will help compensate for the line drop.