ASVAB Electronics Information Practice Test 433574 Results

Your Results Global Average
Questions 5 5
Correct 0 3.56
Score 0% 71%

Review

1

The formula specifying Ohm's law is which of the following?

76% Answer Correctly

V = I2R

\(V = {R \over I}\)

\(V = {I \over R}\)

V = IR


Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.


2

If an electrical circuit is interrupted, which of the following will result?

61% Answer Correctly

parallel circuit

open circuit

closed circuit

short circuit


Solution

A closed circuit is a complete loop or path that electricity follows. It consists of a source of voltage, a load, and connective conductors. If the circuit is interrupted, if a wire is disconnected or cut for example, it becomes an open circuit and no electricity will flow.


3

A transformer utilizes an inductor to increase or decrease what in a circuit?

61% Answer Correctly

current

resistance

load

voltage


Solution

A transformer utilizes an inductor to increase or decrease the voltage in a circuit. AC flowing in a coil wrapped around an iron core magnetizes the core causing it to produce a magnetic field. This magnetic field generates a voltage in a nearby coil of wire and, depending on the number of turns in the wire of the primary (source) and secondary coils and their proximity, voltage is induced in the secondary coil.


4

Electrons will flow as current from areas of __________ potential (concentration of electrons) to areas of __________ potential.

74% Answer Correctly

high, low

low, high

low, low

high, high


Solution

Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.


5

You would measure the amount of voltage between two points in a circuit with a(n):

82% Answer Correctly

ammeter

battery

voltmeter

reostat


Solution

Voltage (V) is the electrical potential difference between two points. A voltmeter is used to measure the voltage between two points in a circuit.