ASVAB Electronics Information Practice Test 456552 Results

Your Results Global Average
Questions 5 5
Correct 0 3.57
Score 0% 71%

Review

1

Resistance and current are __________ proportional.

68% Answer Correctly

inversely

directly

not

exponentially


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


2 What's the overall power consumption of a piece of equipment that is rated for 7 amps at 20 volts?
80% Answer Correctly
141.5 W
154 W
126 W
140 W

Solution
Power is measured in watts (W) and 1 watt equals 1 ampere multiplied by 1 volt: P = \( V \times I \). For this problem, the equipment is rated for 7 amps (I) at 20 volts (V) so the equation becomes P = \( 20 \times 7 \) = 140 W

3

Which of the following is a characteristic of batteries connected in series?

61% Answer Correctly

the positive terminal of one battery is connected to the positive terminal of the next

total voltage equals the sum of the individual battery voltages

total voltage equals the average of the individual battery voltages

two connections are made between each adjacent battery


Solution

You can multiply the voltage or the current supplied by individual batteries by connecting them together either in series or in parallel. The characteristics of batteries connected in series are that total voltage equals the sum of the individual battery voltages, total current equals the average of the individual battery currents, the positive terminal of one battery is connected to the negative terminal of the next, and one connection is made between each adjacent battery.


4

Which of the following is the formula for calculating electrical power?

73% Answer Correctly

\(P = {V \over I}\)

\(P = {I \over V}\)

P = I2V

P = IV


Solution

Electrical power is measured in watts (W) and is calculated by multiplying the voltage (V) applied to a circuit by the resulting current (I) that flows in the circuit: P = IV. In addition to measuring production capacity, power also measures the rate of energy consumption and many loads are rated for their consumption capacity. For example, a 60W lightbulb utilizes 60W of energy to produce the equivalent of 60W of heat and light energy.


5

Current is the rate of flow of electrons per unit time and is measured in:

69% Answer Correctly

amperes

volts

coulombs

ohms


Solution

Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.