ASVAB Electronics Information Practice Test 473678 Results

Your Results Global Average
Questions 5 5
Correct 0 2.85
Score 0% 57%

Review

1

Which of the following allows encapsulating complex circuit designs for easier integration into electronic devices and machines?

67% Answer Correctly

parallel circuits

integrated circuits

series-parallel circuits

series circuits


Solution

Circuits containing transistors are packaged into integrated circuit chips that allow encapsulating complex circuit designs (CPU, memory, I/O) for easier integration into electronic devices and machines.


2

The diameter of a number 12 wire is __________ the diameter of a number 6 wire?

52% Answer Correctly

more than

double

triple

less than


Solution

The larger the number the smaller the diameter of the wire. So, the diameter of a number 12 wire is less than the diameter of a number 6 wire.


3

Electrons will flow as current from areas of __________ potential (concentration of electrons) to areas of __________ potential.

74% Answer Correctly

high, high

low, high

high, low

low, low


Solution

Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.


4

In an electronic circuit, a thermocouple can be used to:

42% Answer Correctly

increase or decrease the temperature of a component in the circuit

open or close a circuit at a designated temperature

link the temperature of one component in the circuit to that of another component in the circuit

keep the circuit at a designated safe temperature


Solution

A thermocouple is a temperature sensor that consists of two wires made from different conductors. The junction of these two wires produces a voltage based on the temperature difference between them and can be used like a switch to open or close the circuit at a designated temperature.


5

In metals, increasing the temperature typically _____________ conductivity.

50% Answer Correctly

does nothing to

eliminates

decreases

increases


Solution

All conductors have resistance and the amount of resistance varies with the element. Metals exhibit increased resistance (and, therefore, lower conductivity) as their temperature increases.