A transistor works by allowing a small amount of current applied at the base to control general current flow from collector to emitter through the transistor.

Connecting the 8 batteries in series multiplies their voltage while keeping their current the same yielding a 48V 10A configuration. Connecting the 8 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 6V 80A configuration. Using a series-parallel connection, 4 batteries can be connected in series and 4 can be connected in parallel resulting in a 24V 40A configuration.

An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.

Connecting the 4 batteries in series multiplies their voltage while keeping their current the same yielding a 36V 10A configuration. Connecting the 4 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 40A configuration. Using a series-parallel connection, 2 batteries can be connected in series and 2 can be connected in parallel resulting in a 18V 20A configuration.

The hertz is a unit of measurement for frequency.