ASVAB Electronics Information Practice Test 506238 Results

Your Results Global Average
Questions 5 5
Correct 0 3.23
Score 0% 65%

Review

1

Which of the following is a characteristic of batteries connected in series?

61% Answer Correctly

total voltage equals the sum of the individual battery voltages

the positive terminal of one battery is connected to the positive terminal of the next

total voltage equals the average of the individual battery voltages

two connections are made between each adjacent battery


Solution

You can multiply the voltage or the current supplied by individual batteries by connecting them together either in series or in parallel. The characteristics of batteries connected in series are that total voltage equals the sum of the individual battery voltages, total current equals the average of the individual battery currents, the positive terminal of one battery is connected to the negative terminal of the next, and one connection is made between each adjacent battery.


2

The volt is a unit of measurement for:

79% Answer Correctly

power

capacitance

voltage

current


Solution

Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.


3 How would you connect 10 [9V 15A] batteries to achieve a combined power output of 90V 15A?
52% Answer Correctly
orthogonal
perpendicular
series-parallel
series

Solution

Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 90V 15A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 150A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 45V 75A configuration.


4

In a series circuit, which of the following is the same across all branches of the circuit?

60% Answer Correctly

voltage

conductance

current

resistance


Solution

A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.


5

You would measure the amount of current through a circuit with a(n):

68% Answer Correctly

battery

potentiometer

voltmeter

ammeter


Solution

Current is the rate of flow of electrons per unit time and is measured in amperes (A). An ammeter is used to measure the electric current in a circuit.