ASVAB Electronics Information Practice Test 524494 Results

Your Results Global Average
Questions 5 5
Correct 0 3.22
Score 0% 64%

Review

1

Which of the following statements about electrical resistance is true?

75% Answer Correctly

the more resistive the conductor is the slower electron flow will be

the less resistive the conductor is the slower electron flow will be

the more resistive the conductor is the faster electron flow will be

electrically conductive materials have no resistive properties


Solution

Resistance is opposition to the flow of current. As resistance increases, current decreases as resistance and current are inversely proportional.


2

Resistance and current are __________ proportional.

68% Answer Correctly

not

directly

exponentially

inversely


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


3

Which of the following allows DC to pass easily but resists the flow of AC?

55% Answer Correctly

semiconductor

capacitor

inductor

transformer


Solution

An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.


4

In household electrical wiring, which color of insulation indicates the 'hot' wire?

50% Answer Correctly

black

white

green

red


Solution

In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.


5

Which of the following will help to prevent a short circuit?

74% Answer Correctly

transistor

resistor

fuse

diode


Solution

Fuses are thin wires that melt when the current in a circuit exceeds a preset amount. They help prevent short circuits from damaging circuit components when an unusually large current is applied to the circuit, either through component failure or spikes in applied voltage.