ASVAB Electronics Information Practice Test 552541 Results

Your Results Global Average
Questions 5 5
Correct 0 3.16
Score 0% 63%

Review

1

This circuit component symbol represents a(n):

71% Answer Correctly

potentiometer

resistor

inductor

capacitor


Solution

Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance.  Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.


2

In electrical wiring, which of the following are proportional?

50% Answer Correctly

the diameter of the wire and the amount of the current

the diameter of the wire and the amount of the voltage

the length of the wire and the amount of the voltage

the length of the wire and the amount of the current


Solution

Current flow through a wire increases the temperature of the wire. If too small a wire is used, the wire will heat up causing a loss in conductivity and possibly a fire. The thicker in diameter a wire is, the more current it can carry without overheating.


3

Resistance is measured in:

86% Answer Correctly

volts

ohms

amperes

coulombs


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


4

A __________ electric current produces a magnetic field proportional to the amount of current flow.

61% Answer Correctly

low voltage

moving

high voltage

stationary


Solution

A moving electric current produces a magnetic field proportional to the amount of current flow. This magnetic field can be made stronger by winding the wire into a coil and further enhanced if done around an iron containing (ferrous) core.


5

Which of the following is not an advantage of semiconductors over conductors?

49% Answer Correctly

materials to produce semiconductors are cheap and abundant

a semiconductor conducts current better than a conductor

a semiconductor exhibits increased conductivity with increased temperatures

a semiconductor's conductivity can be varied under an external electrical field


Solution

A semiconductor is a material that has a limited ability to conduct electrical current with conductivity between that of an insulator and that of a conductor. Silicon, a cheap and abundant material, is the most used semiconductor material although other materials are used in the electronics components made from semiconductors. The primary advantages of a semiconductor over a conductor is that the conductivity of a semiconductor can be varied under an external electrical field giving engineers precise control over complex circuits and, unlike conductors like metals, a semiconductor's conductivity increases with increased temperatures.