| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.64 |
| Score | 0% | 73% |
The ohm is a unit of measurement for:
energy |
|
capacitance |
|
power |
|
resistance |
Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.
Resistance is opposition to which of the following?
voltage |
|
conductance |
|
impedance |
|
current |
Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.
This circuit component symbol represents a(n):
diode |
|
potentiometer |
|
fuse |
|
capacitor |
Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.
The formula specifying Ohm's law is which of the following?
V = IR |
|
\(V = {I \over R}\) |
|
\(V = {R \over I}\) |
|
V = I2R |
Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.
Electricity cannot flow...
through a circuit with resistance |
|
through an open circuit |
|
through a circuit under load |
|
through a closed circuit |
An electrical circuit is a path through which electricity flows. This path contains one or more components that create a load (something that is using electricity) and that load acts as resistance to the passage of electricity through the circuit. Electricity can only flow through a circuit when the path is closed and cannot flow through an open circuit.