ASVAB Electronics Information Practice Test 564147 Results

Your Results Global Average
Questions 5 5
Correct 0 2.89
Score 0% 58%

Review

1

In household electrical wiring, which color of insulation indicates the 'hot' wire?

50% Answer Correctly

red

black

white

green


Solution

In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.


2

The rate of flow of electrons per unit time is which of the following?

74% Answer Correctly

resistance

voltage

conductance

current


Solution

Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.


3

If an electrical circuit is interrupted, which of the following will result?

61% Answer Correctly

parallel circuit

open circuit

closed circuit

short circuit


Solution

A closed circuit is a complete loop or path that electricity follows. It consists of a source of voltage, a load, and connective conductors. If the circuit is interrupted, if a wire is disconnected or cut for example, it becomes an open circuit and no electricity will flow.


4 Suppose you have 4 [9V 5A] batteries that you can connect together in series, in parallel, or in series-parallel. Which of the following voltage and ampere combinations cannot be attained using these 4 batteries?
46% Answer Correctly
36V 5A
18V 10A
9V 20A
4V 45A

Solution

Connecting the 4 batteries in series multiplies their voltage while keeping their current the same yielding a 36V 5A configuration. Connecting the 4 batteries in parallel multiplies their current while keeping their voltage the same yielding a 9V 20A configuration. Using a series-parallel connection, 2 batteries can be connected in series and 2 can be connected in parallel resulting in a 18V 10A configuration.


5

Which of the following is the same for each branch of a parallel circuit?

57% Answer Correctly

power

current

voltage

resistance


Solution

In a parallel circuit, each load occupies a separate parallel path in the circuit and the input voltage is fully applied to each path. Unlike a series circuit where current (I) is the same at all points in the circuit, in a parallel circuit, voltage (V) is the same across each parallel branch of the circuit but current differs in each branch depending on the load (resistance) present.