| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.01 |
| Score | 0% | 60% |
Which of the following is the same for each branch of a parallel circuit?
current |
|
power |
|
resistance |
|
voltage |
In a parallel circuit, each load occupies a separate parallel path in the circuit and the input voltage is fully applied to each path. Unlike a series circuit where current (I) is the same at all points in the circuit, in a parallel circuit, voltage (V) is the same across each parallel branch of the circuit but current differs in each branch depending on the load (resistance) present.
| series | |
| perpendicular | |
| orthogonal | |
| parallel |
Connecting the 4 batteries in series multiplies their voltage while keeping their current the same yielding a 36V 20A configuration. Connecting the 4 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 80A configuration. Using a series-parallel connection, 2 batteries can be connected in series and 2 can be connected in parallel resulting in a 18V 40A configuration.
Which of the following is a difference between a circuit breaker and a fuse?
a fuse is cheaper than a circuit breaker |
|
a circuit breaker can be reused |
|
a fuse responds more quickly than a circuit breaker |
|
all of these |
Like fuses, circuit breakers stop current flow once it reaches a certain amount. They have the advantage of being reusable (fuses must be replaced when "blown") but respond more slowly to current surges and are more expensive than fuses.
What is the primary difference between a rectifier and an inverter?
a rectifier strips out the AC portion of electricity while an inverter strips out the DC portion |
|
a rectifier converts an AC input to DC while an inverter converts a DC input to AC |
|
a rectifier strips out the DC portion of electricity while an inverter strips out the AC portion |
|
a rectifier converts a DC input to AC while an inverter converts an AC input to DC |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.
Electromotive force is another name for:
voltage |
|
power |
|
energy |
|
current |
Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.