ASVAB Electronics Information Practice Test 616174 Results

Your Results Global Average
Questions 5 5
Correct 0 3.41
Score 0% 68%

Review

1

Current is the rate of flow of electrons per unit time and is measured in:

69% Answer Correctly

volts

amperes

coulombs

ohms


Solution

Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.


2

This circuit component symbol represents a(n):

66% Answer Correctly

diode

potentiometer

fuse

capacitor


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.


3

Capacitors connected in series produce __________ capacitance compared to capacitors connected in parallel.

45% Answer Correctly

less

more

no

the same


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors connected in series produce less capacitance than capacitors connected in parallel.


4

All electricity is the movement of which subatomic particles?

89% Answer Correctly

protons

electrons

nuclei

neutrons


Solution

All electricity is the movement of electrons which are subatomic particles that orbit the nucleus of an atom. Electrons occupy various energy levels called shells and how well an element enables the flow of electrons depends on how many electrons occupy its outer (valence) electron shell.


5

This circuit component symbol represents a(n):

71% Answer Correctly

transistor

inductor

capacitor

diode


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.