| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.60 |
| Score | 0% | 72% |
The ampere is a unit of measurement for:
power |
|
energy |
|
current |
|
inductance |
Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.
Which of the following is a characteristic of batteries connected in parallel?
total current equals the average of the individual battery currents |
|
the positive terminal of one battery is connected to the negative terminal of the next |
|
total current equals the sum of the individual battery currents |
|
one connection is made between each adjacent battery |
You can multiply the voltage or the current supplied by individual batteries by connecting them together either in series or in parallel. The characteristics of batteries connected in parallel are that total voltage equals the average of the individual battery voltages, total current equals the sum of the individual battery currents, the positive terminal of one battery is connected to the positive terminal of the next, the negative terminal of one battery is connected to the negative terminal of the next, and two connections are made between each adjacent battery.
| 6 A | |
| 6.6 A | |
| 7 A | |
| 9 A |
Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.
Solved for current, I = \( \frac{V}{R} \) = \( \frac{300}{50} \) = 6 A
The conversion of alternating current (AC) into direct current (DC) is called:
reactance |
|
rectification |
|
inductance |
|
capacitance |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.
Which of these materials is not a good conductor of electricity?
copper |
|
gold |
|
air |
|
tin |
All conductors have resistance and the amount of resistance varies with the element. In general, metals make the best conductors of electricity and non-metals make the worst conductors of electricity.