| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.25 |
| Score | 0% | 65% |
| 19 A | |
| 14.25 A | |
| 9.5 A | |
| 5.5 A |
Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.
Solved for current, I = \( \frac{V}{R} \) = \( \frac{950}{100} \) = 9.5 A
In a series circuit, which of the following is the same across all branches of the circuit?
conductance |
|
current |
|
resistance |
|
voltage |
A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.
Direct current flows from the __________ terminal of the voltage source to the __________ terminal.
negative, negative |
|
positive, positive |
|
positive, negative |
|
negative, positive |
Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery.
Which of the following is a characteristic of batteries connected in series?
total voltage equals the sum of the individual battery voltages |
|
total voltage equals the average of the individual battery voltages |
|
the positive terminal of one battery is connected to the positive terminal of the next |
|
two connections are made between each adjacent battery |
You can multiply the voltage or the current supplied by individual batteries by connecting them together either in series or in parallel. The characteristics of batteries connected in series are that total voltage equals the sum of the individual battery voltages, total current equals the average of the individual battery currents, the positive terminal of one battery is connected to the negative terminal of the next, and one connection is made between each adjacent battery.
What is the primary difference between a rectifier and an inverter?
a rectifier strips out the AC portion of electricity while an inverter strips out the DC portion |
|
a rectifier converts an AC input to DC while an inverter converts a DC input to AC |
|
a rectifier converts a DC input to AC while an inverter converts an AC input to DC |
|
a rectifier strips out the DC portion of electricity while an inverter strips out the AC portion |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.