ASVAB Electronics Information Practice Test 673414 Results

Your Results Global Average
Questions 5 5
Correct 0 3.28
Score 0% 66%

Review

1

The joule is a unit of measurement for:

67% Answer Correctly

power

energy

resistance

capacitance


Solution

The joule is a unit of measurement for energy.


2 How would you connect 8 [12V 15A] batteries to achieve a combined power output of 96V 15A?
52% Answer Correctly
perpendicular
orthogonal
series
series-parallel

Solution

Connecting the 8 batteries in series multiplies their voltage while keeping their current the same yielding a 96V 15A configuration. Connecting the 8 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 12V 120A configuration. Using a series-parallel connection, 4 batteries can be connected in series and 4 can be connected in parallel resulting in a 48V 60A configuration.


3

Why does current in an electric circuit create heat?

77% Answer Correctly

the wire in the circuit burns when current passes through

current is naturally hot

voltage is naturally hot

heat is created when the current overcomes resistance in the wire


Solution

Current in an electric circuit creates heat when the current overcomes resistance in the wire.


4

An inductor __________ changes in the electric current flowing through it.

61% Answer Correctly

resists

eliminates

enhances

doubles


Solution

An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.


5

In an electrical circuit, resistors have fixed or __________ resistance.

69% Answer Correctly

parallel

variable

dynamic

series


Solution

Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance.  Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.