| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.94 |
| Score | 0% | 59% |
In a series circuit, which of the following is the same across all branches of the circuit?
voltage |
|
current |
|
resistance |
|
conductance |
A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.
This circuit component symbol represents a(n):
capacitor |
|
inductor |
|
resistor |
|
transformer |
An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.
Which of the following statements about a capacitor is false?
you should always discharge any capacitors before working on an electronic circuit |
|
a capacitor remains charged even after the input voltage is removed |
|
it is safe to touch a capacitor with your hands as long as it is small |
|
to discharge a capacitor safely, use a high-wattage resistor comparable to the capacitance of the capacitor |
The purpose of a capacitor is to retain electric charge and it will do so even after its input voltage is removed. After the input voltage is removed, the capacitor will slowly discharge but, depending on the size and characteristics of the capacitor, discharging could take from a few minutes to a few years. So, it's never safe to touch a capacitor with your hands and you should make sure to discharge any capacitors in a circuit before working on it using an appropriately high-wattage resistor or a capacitor discharge tool.
In household electrical wiring, which color of insulation indicates the 'hot' wire?
green |
|
black |
|
red |
|
white |
In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.
Which of the following is not a characteristic of direct current?
an example power source is a generator |
|
used to power your cell phone |
|
electrons flow in only one consistent direction |
|
cannot easily travel distances without power loss |
Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of DC is a battery. In contrast to the constant one-way flow of direct current, alternating current changes direction many times each second. Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances.