ASVAB Electronics Information Practice Test 689339 Results

Your Results Global Average
Questions 5 5
Correct 0 3.34
Score 0% 67%

Review

1 Use Ohm's Law to calculate the value of resistance in this circuit if voltage is 600 volts and current is 7.5 amps.
80% Answer Correctly
81 Ω
80 Ω
72 Ω
26 Ω

Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.

Solved for resistance, R = \( \frac{V}{I} \) = \( \frac{600}{7.5} \) = 80 Ω


2

The conversion of alternating current (AC) into direct current (DC) is called:

69% Answer Correctly

capacitance

inductance

reactance

rectification


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.


3

This circuit component symbol represents a(n):

71% Answer Correctly

inductor

capacitor

transistor

diode


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.


4

What is the frequency of most household electrical systems?

59% Answer Correctly

110V

60Hz

60MHz

110Hz


Solution

Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances. Most households use electricity with a frequency of 60Hz.


5

A transistor works by allowing a small amount of current to control general current flow. Where is the small amount of current applied?

55% Answer Correctly

input

collector

base

emitter


Solution

The transistor is the foundation of modern electronic devices. It is made entirely from semiconductor material (making it a solid state device) and can serve many different functions in a circuit including acting as a switch, amplifier, or current regulator. A transistor works by allowing a small amount of current applied at the base to control general current flow from collector to emitter through the transistor.