| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.32 |
| Score | 0% | 66% |
The ampere is a unit of measurement for:
energy |
|
power |
|
current |
|
inductance |
Current is the rate of flow of electrons per unit time and is measured in amperes (A). A coulomb (C) is the quantity of electricity conveyed in one second by a current of one ampere.
Which of the following is not a characteristic of a step-up transformer?
the primary voltage is higher than the secondary voltage |
|
the secondary voltage is higher than the primary voltage |
|
increases voltage |
|
has more turns in the secondary winding than in the primary winding |
As their names indicate, a step-up transformer is used to step up or increase voltage and a step-down transformer is used to step down or decrease voltage. In a step-up transformer, the secondary voltage is higher than the primary voltage and it has more turns in the secondary winding than in the primary winding.
| 3002 W | |
| 3000 W | |
| 9000 W | |
| 2994 W |
Inductance is a factor in which of the following?
determining energy stored by a capacitor |
|
a DC circuit |
|
an AC circuit |
|
batteries connected in serial |
Inductance is a property of an AC circuit (or a component in an AC circuit) that quantifies resistance to changes in current. The current in an AC circuit is continuously changing and inductive reactance (the opposition to change) depends both on the inductance of the circuit or component and the rate at which the current is changing.
This circuit diagram represents a(n):
open circuit |
|
series-parallel circuit |
|
series circuit |
|
parallel circuit |
A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.