| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.97 |
| Score | 0% | 59% |
A diode to an electronic circuit is like a _______________ to a city?
parking lot |
|
highway |
|
traffic light |
|
one-way street |
A diode allows current to pass easily in one direction and blocks current in the other direction.
| 15V 150A | |
| 75V 75A | |
| 150V 150A | |
| 150V 15A |
Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 150V 15A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yielding a 15V 150A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 75V 75A configuration.
In electrical wiring, which of the following are proportional?
the diameter of the wire and the amount of the current |
|
the diameter of the wire and the amount of the voltage |
|
the length of the wire and the amount of the current |
|
the length of the wire and the amount of the voltage |
Current flow through a wire increases the temperature of the wire. If too small a wire is used, the wire will heat up causing a loss in conductivity and possibly a fire. The thicker in diameter a wire is, the more current it can carry without overheating.
| series | |
| series-parallel | |
| parallel | |
| orthogonal |
Connecting the 4 batteries in series multiplies their voltage while keeping their current the same yielding a 36V 20A configuration. Connecting the 4 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 80A configuration. Using a series-parallel connection, 2 batteries can be connected in series and 2 can be connected in parallel resulting in a 18V 40A configuration.
You would measure the amount of voltage between two points in a circuit with a(n):
voltmeter |
|
battery |
|
ammeter |
|
reostat |
Voltage (V) is the electrical potential difference between two points. A voltmeter is used to measure the voltage between two points in a circuit.