| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.62 |
| Score | 0% | 72% |
An engineer who wants to document an electric circuit would create which of the following?
a schematic |
|
a matrix |
|
a layout |
|
a blueprint |
A schematic is the proper name for a drawing of an electric or electronic circuit.
Electrons will flow as current from areas of __________ potential (concentration of electrons) to areas of __________ potential.
high, high |
|
low, low |
|
low, high |
|
high, low |
Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.
| 92 V | |
| 30 V | |
| 270 V | |
| 90 V |
Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.
V = \( I \times R \) = \( 9 \times 10 \) = 90 V
This circuit component symbol represents a(n):
transistor |
|
capacitor |
|
inductor |
|
diode |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.
An amplifier is most similar in function to which of the following:
step-down transformer |
|
capacitor |
|
step-up transformer |
|
transistor |
An amplifier is a device that takes a small input signal and creates a larger output signal. This makes it most similar to a step-up transformer which takes a smaller input voltage and creates a larger output voltage.