ASVAB Electronics Information Practice Test 755564 Results

Your Results Global Average
Questions 5 5
Correct 0 2.58
Score 0% 52%

Review

1 How would you connect 10 [15V 15A] batteries to achieve a combined power output of 15V 150A?
51% Answer Correctly
parallel
series-parallel
orthogonal
series

Solution

Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 150V 15A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 15V 150A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 75V 75A configuration.


2

Which of the following is not a characteristic of direct current?

48% Answer Correctly

cannot easily travel distances without power loss

an example power source is a generator

used to power your cell phone

electrons flow in only one consistent direction


Solution

Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of DC is a battery. In contrast to the constant one-way flow of direct current, alternating current changes direction many times each second. Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances.


3

Which of the following is not a common type of battery?

41% Answer Correctly

dry cell

deep-cycle

wet cell

power-cycle


Solution

Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery. The three most common types of batteries are dry cell (used in small devices like TV remotes), wet cell (used for cars), and deep-cycle (storage batteries used primarily for backup and emergency power).


4

Why is an insulator a poor conductor of electricity?

68% Answer Correctly

an insulator has few free electrons

an insulator is made of organic material

an insulator has many free electrons

an insulator is made of inorganic material


Solution

Insulators have valence shells that are more than half full of electrons and, as such, are tightly bound to the nucleus and difficult to move from one atom to another.


5

In household electrical wiring, which color of insulation indicates the 'hot' wire?

50% Answer Correctly

white

black

red

green


Solution

In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.