| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.12 |
| Score | 0% | 62% |
The most common circuit configuration is:
series |
|
parallel |
|
household |
|
series-parallel |
Circuits are not limited to only series or only parallel configurations. Most circuits contain a mix of series and parallel segments. A good example is a household circuit breaker. Electrical outlets in each section of the house are wired in parallel with the circuit breaker for that section wired in series making it easy to cut off electricity to the parallel parts of the circuit when needed.
Which of the following is the preferred method for splicing wires?
wrap in small gauge wire |
|
wire crimps |
|
screw-on connectors |
|
soldering |
Splicing is permanently joining two wires together. Splicing can be done with screw-on connectors or wire crimps but the preferred method for splicing is soldering. Soldering takes the most effort but results in a connection that is electrically and mechanically identical to the original wire.
An engineer who wants to document an electric circuit would create which of the following?
a matrix |
|
a layout |
|
a blueprint |
|
a schematic |
A schematic is the proper name for a drawing of an electric or electronic circuit.
What is the potential difference in an electrical circuit a measure of?
the resistance at a specific location in the circuit |
|
the current at a specific location in the circuit |
|
the load at a specific location in the circuit |
|
the voltage at a specific location in the circuit |
Electrons flow from an area of high concentration to an area of low concentration. A high voltage indicates a high concentration of electrons that creates a greater potential for electron flow than a low voltage. When applied to a load, voltage creates electricity and potential difference is the measure of voltage at a specific location in an electrical circuit.
Longer the electrical wires mean _______________ voltage drop.
diminishing |
|
greater |
|
complete |
|
lesser |
Electrical wires have a certain amount of resistance per foot. A longer wire means more resistance and a greater voltage drop.