| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.38 |
| Score | 0% | 68% |
Using a fuse with a current rating higher than that required by a circuit:
is recommended |
|
makes no difference |
|
makes the circuit less safe |
|
is required |
A fuse is a type of low resistance resistor that stops current flow in a circuit in response to a larger than intended electric current flow. Using a fuse with a higher current rating than required by a circuit is less safe as it could potentially allow overcurrent and risk a fire or heat-related equipment damage.
What is the voltage of most household electrical systems in the United States?
60V |
|
220V |
|
60Hz |
|
110V |
Most households use electricity with a voltage of 110V.
This circuit component symbol represents a(n):
inductor |
|
diode |
|
transistor |
|
capacitor |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.
Why is an insulator a poor conductor of electricity?
an insulator is made of inorganic material |
|
an insulator has many free electrons |
|
an insulator has few free electrons |
|
an insulator is made of organic material |
Insulators have valence shells that are more than half full of electrons and, as such, are tightly bound to the nucleus and difficult to move from one atom to another.
This circuit component symbol represents a(n):
inductor |
|
capacitor |
|
potentiometer |
|
resistor |
Resistors are used to limit voltage and/or current in a circuit and can have a fixed or variable resistance. Variable resistors (often called potentiometers or rheostats) are used when dynamic control over the voltage/current in a circuit is needed, for example, in a light dimmer or volume control.