ASVAB Electronics Information Practice Test 846699 Results

Your Results Global Average
Questions 5 5
Correct 0 3.40
Score 0% 68%

Review

1

The most common circuit configuration is:

58% Answer Correctly

household

series-parallel

series

parallel


Solution

Circuits are not limited to only series or only parallel configurations. Most circuits contain a mix of series and parallel segments. A good example is a household circuit breaker. Electrical outlets in each section of the house are wired in parallel with the circuit breaker for that section wired in series making it easy to cut off electricity to the parallel parts of the circuit when needed.


2

A capacitor to an electronic circuit is like a _______________ to a house?

66% Answer Correctly

safe

gate

driveway

storage shed


Solution

Capacitors store electricity and are used in circuits as temporary batteries. Capacitors are charged by DC current (AC current passes through a capacitor) and that stored charge can later be dissipated into the circuit as needed. Capacitors are often used to maintain power within a system when it is disconnected from its primary power source or to smooth out or filter voltage within a circuit.


3

All electricity is the movement of which subatomic particles?

89% Answer Correctly

neutrons

protons

nuclei

electrons


Solution

All electricity is the movement of electrons which are subatomic particles that orbit the nucleus of an atom. Electrons occupy various energy levels called shells and how well an element enables the flow of electrons depends on how many electrons occupy its outer (valence) electron shell.


4

An amplifier is most similar in function to which of the following:

65% Answer Correctly

transistor

step-down transformer

step-up transformer

capacitor


Solution

An amplifier is a device that takes a small input signal and creates a larger output signal. This makes it most similar to a step-up transformer which takes a smaller input voltage and creates a larger output voltage.


5

A transformer utilizes an inductor to increase or decrease what in a circuit?

61% Answer Correctly

voltage

current

resistance

load


Solution

A transformer utilizes an inductor to increase or decrease the voltage in a circuit. AC flowing in a coil wrapped around an iron core magnetizes the core causing it to produce a magnetic field. This magnetic field generates a voltage in a nearby coil of wire and, depending on the number of turns in the wire of the primary (source) and secondary coils and their proximity, voltage is induced in the secondary coil.