ASVAB Electronics Information Practice Test 849214 Results

Your Results Global Average
Questions 5 5
Correct 0 3.03
Score 0% 61%

Review

1

If an electrical circuit is interrupted, which of the following will result?

61% Answer Correctly

open circuit

parallel circuit

closed circuit

short circuit


Solution

A closed circuit is a complete loop or path that electricity follows. It consists of a source of voltage, a load, and connective conductors. If the circuit is interrupted, if a wire is disconnected or cut for example, it becomes an open circuit and no electricity will flow.


2 Suppose you have 6 [6V 10A] batteries that you can connect together in series, in parallel, or in series-parallel. Which of the following voltage and ampere combinations cannot be attained using these 6 batteries?
46% Answer Correctly
6V 60A
36V 10A
72V 120A
18V 30A

Solution

Connecting the 6 batteries in series multiplies their voltage while keeping their current the same yielding a 36V 10A configuration. Connecting the 6 batteries in parallel multiplies their current while keeping their voltage the same yielding a 6V 60A configuration. Using a series-parallel connection, 3 batteries can be connected in series and 3 can be connected in parallel resulting in a 18V 30A configuration.


3

The joule is a unit of measurement for:

67% Answer Correctly

capacitance

resistance

energy

power


Solution

The joule is a unit of measurement for energy.


4

A __________ electric current produces a magnetic field proportional to the amount of current flow.

61% Answer Correctly

high voltage

stationary

moving

low voltage


Solution

A moving electric current produces a magnetic field proportional to the amount of current flow. This magnetic field can be made stronger by winding the wire into a coil and further enhanced if done around an iron containing (ferrous) core.


5

Why is an insulator a poor conductor of electricity?

68% Answer Correctly

an insulator has few free electrons

an insulator is made of organic material

an insulator has many free electrons

an insulator is made of inorganic material


Solution

Insulators have valence shells that are more than half full of electrons and, as such, are tightly bound to the nucleus and difficult to move from one atom to another.