ASVAB Electronics Information Practice Test 879507 Results

Your Results Global Average
Questions 5 5
Correct 0 3.57
Score 0% 71%

Review

1

The electrical potential difference between two points is called:

60% Answer Correctly

voltage

resistance

current

conductance


Solution

Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.


2

Direct current flows from the __________ terminal of the voltage source to the __________ terminal.

62% Answer Correctly

positive, negative

positive, positive

negative, positive

negative, negative


Solution

Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery.


3

What type of current flows in only one direction in a circuit?

82% Answer Correctly

alternating

series

direct

parallel


Solution

Direct current flows in only one direction in a circuit, from the negative terminal of the voltage source to the positive. A common source of direct current (DC) is a battery.


4

Resistance is measured in:

86% Answer Correctly

ohms

coulombs

amperes

volts


Solution

Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.


5 How would you connect 6 [6V 10A] batteries to achieve a combined power output of 18V 30A?
67% Answer Correctly
perpendicular
parallel
orthogonal
series-parallel

Solution

Connecting the 6 batteries in series multiplies their voltage while keeping their current the same yielding a 36V 10A configuration. Connecting the 6 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 6V 60A configuration. Using a series-parallel connection, 3 batteries can be connected in series and 3 can be connected in parallel resulting in a 18V 30A configuration.