ASVAB Electronics Information Practice Test 916045 Results

Your Results Global Average
Questions 5 5
Correct 0 3.41
Score 0% 68%

Review

1

The sum of the voltage drops across each resistor in a __________ circuit will equal the total voltage applied to the circuit.

54% Answer Correctly

series-parallel

parallel

series

closed


Solution

A series circuit has only one path for current to flow. In a series circuit, current (I) is the same throughout the circuit and is equal to the total voltage (V) applied to the circuit divided by the total resistance (R) of the loads in the circuit. The sum of the voltage drops across each resistor in the circuit will equal the total voltage applied to the circuit.


2

What kind of diode allows current to flow in the opposite direction once a certain voltage threshold is reached?

50% Answer Correctly

standard diode

v-type diode

light emitting diode

zener diode


Solution

A diode allows current to pass easily in one direction and blocks current in the other direction. A zener diode is a diode which allows current to flow in one direction as normal and will also allow current flow in the reverse direction when the voltage is above a certain value. This value is called the breakdown voltage.


3

Using a fuse with a current rating higher than that required by a circuit:

70% Answer Correctly

is required

is recommended

makes the circuit less safe

makes no difference


Solution

A fuse is a type of low resistance resistor that stops current flow in a circuit in response to a larger than intended electric current flow. Using a fuse with a higher current rating than required by a circuit is less safe as it could potentially allow overcurrent and risk a fire or heat-related equipment damage.


4

You would measure the amount of voltage between two points in a circuit with a(n):

82% Answer Correctly

battery

voltmeter

reostat

ammeter


Solution

Voltage (V) is the electrical potential difference between two points. A voltmeter is used to measure the voltage between two points in a circuit.


5

Which of the following can conduct electricity under some conditions but not others?

82% Answer Correctly

conductor

resistor

semiconductor

insulator


Solution

Semiconductors have valence shells that are exacly half full and can conduct electricity under some conditions but not others. This property makes them useful for the control of electrical current.