ASVAB Electronics Information Practice Test 959699 Results

Your Results Global Average
Questions 5 5
Correct 0 2.91
Score 0% 58%

Review

1 How would you connect 10 [9V 15A] batteries to achieve a combined power output of 45V 75A?
66% Answer Correctly
series-parallel
perpendicular
orthogonal
series

Solution

Connecting the 10 batteries in series multiplies their voltage while keeping their current the same yielding a 90V 15A configuration. Connecting the 10 batteries in parallel multiplies their current while keeping their voltage the same yieleding a 9V 150A configuration. Using a series-parallel connection, 5 batteries can be connected in series and 5 can be connected in parallel resulting in a 45V 75A configuration.


2

The formula specifying Ohm's law is which of the following?

76% Answer Correctly

\(V = {I \over R}\)

\(V = {R \over I}\)

V = I2R

V = IR


Solution

Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.


3

Which of the following is not a characteristic of a step-up transformer?

54% Answer Correctly

the primary voltage is higher than the secondary voltage

has more turns in the secondary winding than in the primary winding

increases voltage

the secondary voltage is higher than the primary voltage


Solution

As their names indicate, a step-up transformer is used to step up or increase voltage and a step-down transformer is used to step down or decrease voltage. In a step-up transformer, the secondary voltage is higher than the primary voltage and it has more turns in the secondary winding than in the primary winding.


4

In an electronic circuit, a thermocouple can be used to:

42% Answer Correctly

keep the circuit at a designated safe temperature

open or close a circuit at a designated temperature

link the temperature of one component in the circuit to that of another component in the circuit

increase or decrease the temperature of a component in the circuit


Solution

A thermocouple is a temperature sensor that consists of two wires made from different conductors. The junction of these two wires produces a voltage based on the temperature difference between them and can be used like a switch to open or close the circuit at a designated temperature.


5

The valence shell of a conductor is how full of electrons?

52% Answer Correctly

less than half full

full

half full

more than half full


Solution

Conductors are elements that allow electrons to flow freely. Their valence shell is less than half full of electrons that are able to move easily from one atom to another.