| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 2.94 |
| Score | 0% | 59% |
The conversion of alternating current (AC) into direct current (DC) is called:
rectification |
|
reactance |
|
capacitance |
|
inductance |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.
An inductor __________ changes in the electric current flowing through it.
resists |
|
doubles |
|
eliminates |
|
enhances |
An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.
Electromotive force is another name for:
current |
|
energy |
|
voltage |
|
power |
Voltage (V) is the electrical potential difference between two points. Electrons will flow as current from areas of high potential (concentration of electrons) to areas of low potential. Voltage and current are directly proportional in that the higher the voltage applied to a conductor the higher the current that will result.
In household electrical wiring, which color of insulation indicates the 'hot' wire?
red |
|
white |
|
black |
|
green |
In the NM cable used for wiring homes, each cable has three wires inside a sheath with each wire covered in a different color of insulation to indicate its type. The wire with the black insulation is the 'hot' wire, white is the neutral wire, and the ground wire is either covered in green insulation or left bare.
What is the primary difference between a rectifier and an inverter?
a rectifier converts a DC input to AC while an inverter converts an AC input to DC |
|
a rectifier strips out the DC portion of electricity while an inverter strips out the AC portion |
|
a rectifier converts an AC input to DC while an inverter converts a DC input to AC |
|
a rectifier strips out the AC portion of electricity while an inverter strips out the DC portion |
A diode allows current to pass easily in one direction and blocks current in the other direction. Diodes are commonly used for rectification which is the conversion of alternating current (AC) into direct current (DC). Because a diode only allows current flow in one direction, it will pass either the upper or lower half of AC waves (half-wave rectification) creating pulsating DC. Multiple diodes can be connected together to utilize both halves of the AC signal in full-wave rectification.