| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.26 |
| Score | 0% | 65% |
| 60 Ω | |
| 63 Ω | |
| 61.5 Ω | |
| 59 Ω |
Ohm's law specifies the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit: V = IR.
Solved for resistance, R = \( \frac{V}{I} \) = \( \frac{30}{0.5} \) = 60 Ω
Which of the following allows DC to pass easily but resists the flow of AC?
capacitor |
|
semiconductor |
|
transformer |
|
inductor |
An inductor is coiled wire that stores electric energy in the form of magnetic energy and resists changes in the electric current flowing through it. If current is increasing, the inductor produces a voltage that slows the increase and, if current is decreasing, the magnetic energy in the coil opposes the decrease to keep the current flowing longer. In contrast to capacitors, inductors allow DC to pass easily but resist the flow of AC.
If an electrical circuit is interrupted, which of the following will result?
open circuit |
|
closed circuit |
|
short circuit |
|
parallel circuit |
A closed circuit is a complete loop or path that electricity follows. It consists of a source of voltage, a load, and connective conductors. If the circuit is interrupted, if a wire is disconnected or cut for example, it becomes an open circuit and no electricity will flow.
This circuit diagram represents a(n):
rectifier |
|
parallel circuit |
|
series circuit |
|
series-parallel circuit |
In a parallel circuit, each load occupies a separate parallel path in the circuit and the input voltage is fully applied to each path. Unlike a series circuit where current (I) is the same at all points in the circuit, in a parallel circuit, voltage (V) is the same across each parallel branch of the circuit but current differs in each branch depending on the load (resistance) present.
This circuit component symbol represents a(n):
DC source |
|
transformer |
|
transistor |
|
AC source |
In contrast to the constant one-way flow of direct current, alternating current changes direction many times each second. Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances.