| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.24 |
| Score | 0% | 65% |
In an electronic circuit, a thermocouple can be used to:
open or close a circuit at a designated temperature |
|
link the temperature of one component in the circuit to that of another component in the circuit |
|
keep the circuit at a designated safe temperature |
|
increase or decrease the temperature of a component in the circuit |
A thermocouple is a temperature sensor that consists of two wires made from different conductors. The junction of these two wires produces a voltage based on the temperature difference between them and can be used like a switch to open or close the circuit at a designated temperature.
Resistance and current are __________ proportional.
exponentially |
|
inversely |
|
directly |
|
not |
Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.
Resistance is measured in:
coulombs |
|
ohms |
|
volts |
|
amperes |
Resistance is opposition to the flow of current and is measured in ohms (Ω). One ohm is defined as the amount of resistance that will allow one ampere of current to flow if one volt of voltage is applied. As resistance increases, current decreases as resistance and current are inversely proportional.
Which of the following allows encapsulating complex circuit designs for easier integration into electronic devices and machines?
series-parallel circuits |
|
integrated circuits |
|
series circuits |
|
parallel circuits |
Circuits containing transistors are packaged into integrated circuit chips that allow encapsulating complex circuit designs (CPU, memory, I/O) for easier integration into electronic devices and machines.
What is the frequency of most household electrical systems?
110Hz |
|
60Hz |
|
60MHz |
|
110V |
Electricity is delivered from power stations to customers as AC because it provides a more efficient way to transport electricity over long distances. Most households use electricity with a frequency of 60Hz.