ASVAB Mechanical Comprehension Practice Test 117031 Results

Your Results Global Average
Questions 5 5
Correct 0 3.03
Score 0% 61%

Review

1

The advantage of using a third-class lever is that it increases:

37% Answer Correctly

the force applied to the load

the distance traveled by the load

the mechanical advantage of the lever

the speed of the load


Solution

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.


2 If the radius of the axle is 5 and the radius of the wheel is 10, what is the mechanical advantage of this wheel and axle configuration?
36% Answer Correctly
10
1
5
0

Solution

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.


3

Collinear forces:

73% Answer Correctly

act in a common plane

pass through a common point

act along the same line of action

are unrelated to each other


Solution

Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.


4 What's the mechanical advantage of a wedge that's 2 inches wide and 8 inches long?
83% Answer Correctly
5.5
3
4
1

Solution

The mechanical advantage (MA) of a wedge is its length divided by its thickness:

MA = \( \frac{l}{t} \) = \( \frac{8 in.}{2 in.} \) = 4


5

The mechanical advantage of connected gears is proportional to which characteristic of the gears?

73% Answer Correctly

number of teeth

circumference

diameter

speed


Solution

The mechanical advantage (amount of change in speed or torque) of connected gears is proportional to the number of teeth each gear has. Called gear ratio, it's the ratio of the number of teeth on the larger gear to the number of teeth on the smaller gear.  For example, a gear with 12 teeth connected to a gear with 9 teeth would have a gear ratio of 4:3.