ASVAB Mechanical Comprehension Practice Test 15039 Results

Your Results Global Average
Questions 5 5
Correct 0 2.81
Score 0% 56%

Review

1

The force required to initally get an object moving is __________ the force required to keep it moving. 

76% Answer Correctly

higher than

lower than

the same as

opposite


Solution

For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).


2

What's the last gear in a gear train called?

38% Answer Correctly

output gear

idler gear

driven gear

driver gear


Solution

A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.


3 What is the power output of a 8 hp engine that's 95% efficient?
40% Answer Correctly
1045 \( \frac{ft⋅lb}{s} \)
4180 \( \frac{ft⋅lb}{s} \)
11 \( \frac{ft⋅lb}{s} \)
0 \( \frac{ft⋅lb}{s} \)

Solution
\( Efficiency = \frac{Power_{out}}{Power_{in}} \times 100 \)
Solving for power out: \( P_{o} = \frac{E \times P_{i}}{100} \)
Knowing that 1 hp = 550 \( \frac{ft⋅lb}{s} \), Pi becomes 8 hp x 550 \( \frac{ft⋅lb}{s} \) = 4400 \( \frac{ft⋅lb}{s} \)
\( P_{o} = \frac{E \times P_{i}}{100} = \frac{95 \times 4400 \frac{ft⋅lb}{s}}{100} \) \( = \frac{418000 \frac{ft⋅lb}{s}}{100} \) = 4180 \( \frac{ft⋅lb}{s} \)

4

A fixed pulley has a mechanical advantage of:

68% Answer Correctly

0

2

1

-1


Solution

A fixed pulley is used to change the direction of a force and does not multiply the force applied. As such, it has a mechanical advantage of one. The benefit of a fixed pulley is that it can allow the force to be applied at a more convenient angle, for example, pulling downward or horizontally to lift an object instead of upward.


5

Two gears are connected and the smaller gear drives the larger gear. The speed of rotation will __________ and the torque will __________.

61% Answer Correctly

decrease, decrease

increase, decrease

decrease, increase

increase, increase


Solution

Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.