A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

f_Ad_A = f_Bd_B

For this problem, the equation becomes:

20 lbs. x 9 ft. = 70 lbs. x d_B

d_B = \( \frac{20 \times 9 ft⋅lb}{70 lbs.} \) = \( \frac{180 ft⋅lb}{70 lbs.} \) = 2.57 ft.

A wheel and axle uses two different diameter wheels mounted to a connecting axle. Force is applied to the larger wheel and large movements of this wheel result in small movements in the smaller wheel. Because a larger movement distance is being translated to a smaller distance, force is increased with a mechanical advantage equal to the ratio of the diameters of the wheels. An example of a wheel and axle is the steering wheel of a car.

The mechanical advantage of a wheel and axle lies in the difference in radius between the inner (axle) wheel and the outer wheel. But, this mechanical advantage is only realized when the input effort and load are applied to different wheels. Applying both input effort and load to the same wheel results in a mechanical advantage of 1.

A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.