ASVAB Mechanical Comprehension Practice Test 226313 Results

Your Results Global Average
Questions 5 5
Correct 0 2.80
Score 0% 56%

Review

1

Which class of lever offers no mechanical advantage?

45% Answer Correctly

none of these, all levers offer mechanical advantage

second

third

first


Solution

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.


2

What type of load acts on a relatively small area of a structure?

74% Answer Correctly

dynamic load

concentrated load

impact load

non-uniformly distributed load


Solution

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.


3 If the radius of the axle is 3 and the radius of the wheel is 6, what is the mechanical advantage of this wheel and axle configuration?
41% Answer Correctly
3
2.0
0.5
6

Solution

The mechanical advantage of a wheel and axle is the input radius divided by the output radius:

MA = \( \frac{r_i}{r_o} \)

In this case, the input radius (where the effort force is being applied) is 3 and the output radius (where the resistance is being applied) is 6 for a mechanical advantage of \( \frac{3}{6} \) = 0.5


4

What type of load creates different stresses at different locations on a structure?

60% Answer Correctly

dynamic load

static uniformly distributed load

impact load

non-uniformly distributed load


Solution

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.


5

Which of the following will increase the mechanical advantage of this inclined plane?

58% Answer Correctly

shorten the ramp

lengthen the ramp

lower the force acting at the blue arrow

increase the force acting at the blue arrow


Solution

The mechanical advantage (MA) of an inclined plane is the effort distance divided by the resistance distance. In order to increase mechanical advantage, this ratio must increase which means making the effort distance longer and this can be accomplished by lengthening the length of the ramp.