| Your Results | Global Average | |
|---|---|---|
| Questions | 5 | 5 |
| Correct | 0 | 3.06 |
| Score | 0% | 61% |
Which of the following surfaces would have the lowest coefficient of friction?
leather |
|
ice |
|
concrete |
|
tile |
Coefficient of friction (μ) represents how much two materials resist sliding across each other. Smooth surfaces like ice have low coefficients of friction while rough surfaces like concrete have high μ.
The advantage of using a third-class lever is that it increases:
the force applied to the load |
|
the distance traveled by the load |
|
the mechanical advantage of the lever |
|
the speed of the load |
A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.
| 56.25 lbs. | |
| 112.5 lbs. | |
| 28.13 lbs. | |
| 37.5 lbs. |
To balance this lever the torques on each side of the fulcrum must be equal. Torque is weight x distance from the fulcrum so the equation for equilibrium is:
Rada = Rbdb
where a represents the left side of the fulcrum and b the right, R is resistance (weight) and d is the distance from the fulcrum.Solving for Ra, our missing value, and plugging in our variables yields:
Ra = \( \frac{R_bd_b}{d_a} \) = \( \frac{45 lbs. \times 5 ft.}{2 ft.} \) = \( \frac{225 ft⋅lb}{2 ft.} \) = 112.5 lbs.
One Horsepower (hp) is equal to how many watts?
1 |
|
746 |
|
1492 |
|
9.8 |
Power is the rate at which work is done, P = w/t, or work per unit time. The watt (W) is the unit for power and is equal to 1 joule (or newton-meter) per second. Horsepower (hp) is another familiar unit of power used primarily for rating internal combustion engines. 1 hp equals 746 watts.
Which class of lever offers no mechanical advantage?
second |
|
first |
|
third |
|
none of these, all levers offer mechanical advantage |
A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.