ASVAB Mechanical Comprehension Practice Test 249577 Results

Your Results Global Average
Questions 5 5
Correct 0 3.21
Score 0% 64%

Review

1

Lisa lifts a 25 pound box from the floor onto a loading dock 4 ft. off the ground. Sam slides the same box along a ramp to move it up another 4 ft. onto a flatbed truck. Who has done more work?

50% Answer Correctly

Lisa

Sam

Neither have done any work

They have done an equal amount of work


Solution

Work is force multiplied by distance. Because both Connie and Sam moved the same weight the same distance they have done an equal amount of work. Sam employed the mechnacial advantage of an inclined plane so he exerted less effort to do the work but the amount of work done was still the same.


2

Depending on where you apply effort and resistance, the wheel and axle can multiply:

45% Answer Correctly

force or distance

power or distance

speed or power

force or speed


Solution

If you apply the resistance to the axle and the effort to the wheel, the wheel and axle will multiply force and if you apply the resistance to the wheel and the effort to the axle, it will multiply speed.


3

An object's resistance to changes in direction is known as:

81% Answer Correctly

weight

mass

inertia

kinetic energy


Solution

The more mass a substance has the more force is required to move it or to change its direction. This resistance to changes in direction is known as inertia.


4 If input effort is 300 ft⋅lb, what output effort will be produced by a machine with a mechanical advantage of 8?
79% Answer Correctly
9600ft⋅lb
4800ft⋅lb
2400 ft⋅lb
37ft⋅lb

Solution
Mechanical advantage is the ratio of output force to input force and tells us by how many times a machine multiplies input effort. So, a machine with a mechanical advantage of 8 will multiply an input effort of 300 ft⋅lb by 8 to produce an output effort of 2400 ft⋅lb.

5

Two gears are connected and the larger gear drives the smaller gear. The speed of rotation will __________ and the torque will __________.

61% Answer Correctly

decrease, decrease

increase, increase

decrease, increase

increase, decrease


Solution

Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.