Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.

The mechanical advantage (MA) of a wedge is its length divided by its thickness:

MA = \( \frac{l}{t} \) = \( \frac{18 in.}{2 in.} \) = 9

The mechanical advantage (amount of change in speed or torque) of connected gears is proportional to the number of teeth each gear has. Called gear ratio, it's the ratio of the number of teeth on the larger gear to the number of teeth on the smaller gear.  For example, a gear with 12 teeth connected to a gear with 9 teeth would have a gear ratio of 4:3.

The mechanical advantage of a wheel and axle is the input radius divided by the output radius:

MA = \( \frac{r_i}{r_o} \)

In this case, the input radius (where the effort force is being applied) is 6 and the output radius (where the resistance is being applied) is 5 for a mechanical advantage of \( \frac{6}{5} \) = 1.2

MA = \( \frac{load}{effort} \) so effort = \( \frac{load}{MA} \) = \( \frac{35 lbs.}{1.2} \) = 29.17 lbs.

The efficiency of a machine describes how much of the power put into the machine is turned into movement or force. A 100% efficient machine would turn all of the input power into output movement or force. However, no machine is 100% efficient due to friction, heat, wear and other imperfections that consume input power without delivering any output.