Normal force (F_N) represents the force a surface exerts when an object presses against it.

Connected gears of different numbers of teeth are used together to change the rotational speed and torque of the input force. If the smaller gear drives the larger gear, the speed of rotation will be reduced and the torque will increase. If the larger gear drives the smaller gear, the speed of rotation will increase and the torque will be reduced.

Mechanical advantage (MA) is the ratio by which effort force relates to resistance force. If both forces are known, calculating MA is simply a matter of dividing resistance force by effort force:

MA = \( \frac{F_r}{F_e} \) = \( \frac{5 ft.}{12.5 ft.} \) = 0.4

In this case, the mechanical advantage is less than one meaning that each unit of effort force results in just 0.4 units of resistance force. However, a third class lever like this isn't designed to multiply force like a first class lever. A third class lever is designed to multiply distance and speed at the resistance by sacrificing force at the resistance. Different lever styles have different purposes and multiply forces in different ways.

A screw is an inclined plane wrapped in ridges (threads) around a cylinder. The distance between these ridges defines the pitch of the screw and this distance is how far the screw advances when it is turned once. The mechanical advantage of a screw is its circumference divided by the pitch.

Two or more pulleys used together constitute a block and tackle which, unlike a fixed pulley, does impart mechanical advantage as a function of the number of pulleys that make up the arrangement.  So, for example, a block and tackle with three pulleys would have a mechanical advantage of three.