ASVAB Mechanical Comprehension Practice Test 314894 Results

Your Results Global Average
Questions 5 5
Correct 0 2.89
Score 0% 58%

Review

1

The work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. This defines which of the following?

60% Answer Correctly

work-energy theorem

mechanical advantage

conservation of mechanical energy

Pascal's law


Solution

The work-energy theorem states that the work done by the sum of all forces acting on a particle equals the change in the kinetic energy of the particle. Simply put, work imparts kinetic energy to the matter upon which the work is being done.


2

A wedge converts force applied to its blunt end into force __________ its inclined surface.

57% Answer Correctly

perpendicular to

along

opposite to

parallel to


Solution

The wedge is a moving inclined plane that is used to lift, hold, or break apart an object. A wedge converts force applied to its blunt end into force perpendicular to its inclined surface. In contrast to a stationary plane where force is applied to the object being moved, with a wedge the object is stationary and the force is being applied to the plane. Examples of a wedge include knives and chisels.


3

A a seesaw / teeter-totter is an example of which of the following?

69% Answer Correctly

third-class lever

second-class lever

first-class lever

inclined plane


Solution

A first-class lever is used to increase force or distance while changing the direction of the force. The lever pivots on a fulcrum and, when a force is applied to the lever at one side of the fulcrum, the other end moves in the opposite direction. The position of the fulcrum also defines the mechanical advantage of the lever. If the fulcrum is closer to the force being applied, the load can be moved a greater distance at the expense of requiring a greater input force. If the fulcrum is closer to the load, less force is required but the force must be applied over a longer distance. An example of a first-class lever is a seesaw / teeter-totter.


4 If you have a gear train with three gears, the first with 28 teeth, the second with 14 teeth, and the third with 6 teeth, what is its mechanical advantage?
51% Answer Correctly
6.7
8.7
3.7
4.7

Solution

The mechanical advantage of a gear train is its gear ratio. The gear ratio (Vr) is the product of the gear ratios between the pairs of meshed gears. Let N represent the number of teeth for each gear:

Vr = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) \( \frac{N_3}{N_4} \) ... \( \frac{N_n}{N_{n+1}} \)

In this problem, we have three gears so the equation becomes:

Vr = \( \frac{N_1}{N_2} \) \( \frac{N_2}{N_3} \) = \( \frac{28}{14} \) \( \frac{14}{6} \) = \( \frac{28}{6} \) = 4.7


5

Torque involves a perpendicular force applied to a lever arm that moves around a center of rotation. Increasing the length of the lever arm will do which of the following?

54% Answer Correctly

increase torque

decrease applied force

increase applied force

decrease torque


Solution

Torque measures force applied during rotation: τ = rF.  Torque (τ, the Greek letter tau) = the radius of the lever arm (r) multiplied by the force (F) applied. Radius is measured from the center of rotation or fulcrum to the point at which the perpendicular force is being applied. The resulting unit for torque is newton-meter (N-m) or foot-pound (ft-lb).