Collinear forces act along the same line of action, concurrent forces pass through a common point and coplanar forces act in a common plane.

A third-class lever is used to increase distance traveled by an object in the same direction as the force applied. The fulcrum is at one end of the lever, the object at the other, and the force is applied between them. This lever does not impart a mechanical advantage as the effort force must be greater than the load but does impart extra speed to the load. Examples of third-class levers are shovels and tweezers.

A third class lever is designed to multiply distance and speed at the expense of effort force. Because the effort force is greater than the resistance, the mechanical advantage of a third class lever is always less than one.

An example of a third class lever is a broom. The fulcrum is at your hand on the end of the broom, the effort force is your other hand in the middle, and the resistance is at the bottom bristles. The effort force of your hand in the middle multiplies the distance and speed of the bristles at the bottom but at the expense of producing a brushing force that's less than the force you're applying with your hand.

For any given surface, the coefficient of static friction is higher than the coefficient of kinetic friction. More force is required to initally get an object moving than is required to keep it moving. Additionally, static friction only arises in response to an attempt to move an object (overcome the normal force between it and the surface).

Work is accomplished when force is applied to an object: W = Fd where F is force in newtons (N) and d is distance in meters (m). Thus, the more force that must be applied to move an object, the more work is done and the farther an object is moved by exerting force, the more work is done. By definition, work is the displacement of an object resulting from applied force.