ASVAB Mechanical Comprehension Practice Test 329340 Results

Your Results Global Average
Questions 5 5
Correct 0 3.13
Score 0% 63%

Review

1 If the radius of the axle is 5 and the radius of the wheel is 6, what is the mechanical advantage of this wheel and axle configuration?
52% Answer Correctly
1.2
-1
1
6

Solution

The mechanical advantage of a wheel and axle is the input radius divided by the output radius:

MA = \( \frac{r_i}{r_o} \)

In this case, the input radius (where the effort force is being applied) is 6 and the output radius (where the resistance is being applied) is 5 for a mechanical advantage of \( \frac{6}{5} \) = 1.2


2

Friction between two or more solid objects that are not moving relative to each other is called:

73% Answer Correctly

kinetic friction

dynamic friction

gravitational friction

static friction


Solution

Static friction is friction between two or more solid objects that are not moving relative to each other. An example is the friction that prevents a box on a sloped surface from sliding farther down the surface.


3 What is the efficiency of a machine has work input of 235 ft⋅lb and work output of 176 ft⋅lb?
67% Answer Correctly
75%
25%
300%
1%

Solution
Due to friction, a machine will never be able to utilize 100% of its work input. A certain percentage of that input will be lost in overcoming friction within the machine. Effeciency is a measure of how much of a machine's work input can be turned into useful work output and is calculated by dividing work output by work input and multiplying the result by 100:
\( Efficiency = \frac{Work_{out}}{Work_{in}} \times 100 \) \( = \frac{176 ft⋅lb}{235 ft⋅lb} \times 100 \) \( = 75% \) %

4

A watt is the unit for which of the following?

71% Answer Correctly

mechanical advantage

power

work

energy


Solution

Power is the rate at which work is done, P = w/t, or work per unit time. The watt (W) is the unit for power and is equal to 1 joule (or newton-meter) per second. Horsepower (hp) is another familiar unit of power used primarily for rating internal combustion engines. 1 hp equals 746 watts.


5

A truck is using a rope to pull a car. Tension in the rope is greatest in which of the following places?

49% Answer Correctly

in the middle

near the truck

tension is equal in all parts of the rope

near the car


Solution

Tension is a force that stretches or elongates something. When a cable or rope is used to pull an object, for example, it stretches internally as it accepts the weight that it's moving. Although tension is often treated as applying equally to all parts of a material, it's greater at the places where the material is under the most stress.