A gear train is two or more gears linked together. Gear trains are designed to increase or reduce the speed or torque outpout of a rotating system or change the direction of its output. The first gear in the chain is called the driver and the last gear in the chain the driven gear with the gears between them called idler gears.

A concentrated load acts on a relatively small area of a structure, a static uniformly distributed load doesn't create specific stress points or vary with time, a dynamic load varies with time or affects a structure that experiences a high degree of movement, an impact load is sudden and for a relatively short duration and a non-uniformly distributed load creates different stresses at different locations on a structure.

The formula for force of friction (F_f) is the same whether kinetic or static friction applies: F_{f =} μF_N. To distinguish between kinetic and static friction, μ_k and μ_s are often used in place of μ.

Coefficient of friction (μ) represents how much two materials resist sliding across each other.  Smooth surfaces like ice have low coefficients of friction while rough surfaces like concrete have high μ.

Work is accomplished when force is applied to an object: W = Fd where F is force in newtons (N) and d is distance in meters (m). Thus, the more force that must be applied to move an object, the more work is done and the farther an object is moved by exerting force, the more work is done.